Met: 3000-A (with the front side covered) Desk table dimensions are 50X70 cm, with a laminate pen holder of 25 mm thickness and massive edges. There is a book-holder made of transmission under the desk, the front side of which is covered. Desk sides are 25*55*2 mm elliptical pipes connected with 2 pieces of 16x40 profiles. Metal parts of the desk and the chair are Borusan pipe.
Metals are painted using electrostatic oven-drying (at 200°C).
Special plastic shoes are used to cover the parts where the desk touches the floor.
Metallerin boyası elektrostatik fırın boyalıdır,( 200 derece pişirilir. )
Sıranın yere değen kısımlarında özel plastik papuçlar mevcuttur.
Met: 3001-S
Desk table dimensions are 50X70 cm, with a laminate pen holder of 25 mm thickness and massive edges. There is a book-holder made of transmission under the desk. Desk sides are 25*55*2 mm elliptical pipes connected with 2 pieces of 16x40 profile. Metal parts of the desk and the chair are Borusanpipe.
Metals are painted using electrostatic oven-drying (at 200°C).
Special plastic shoes are used to cover the parts where the desk touches the floor.
Met: 3002-S
Desk table dimensions are 45X110 cm, with a laminate pen holder of 25 mm thickness and massive edges. There is a book-holder made of transmission under the desk. Desk sides are 25*55*2 mm elliptical pipes connected with 2 pieces of 16x40 profile. Metal parts of the desk and the chair are Borusan pipe.
Metals are painted using electrostatic oven-drying (at 200°C).
Special plastic shoes are used to cover the parts where the desk touches the floor.
MET 3010-D (6 door) Student Cabinet :
Cupboard body and doors are 18 mm melamine coated chipboard and cupboard accessories are imported. The hinges are movable by 270 degrees. There are vent holes on the doors. Cupboard base feet are made of profile, painted using static powder paint and oven-dried at 200°C. There is 1 piece of mortise lock on each door.
Met: 4001-S
Octagonal desk, table dimensions are 72x48x37 cm, with a laminate pen holder of 25 mm thickness and massive edges. There is a book-holder made of transmission under the desk, the front of which is covered. Desk sides are 25*55*2 mm elliptical pipes connected with 2 pieces of 16x40 profiles. Metal parts of the desk and the chair are Borusan pipe.
Metals are painted using electrostatic oven-drying (at 200°C).
Special plastic shoes are used to cover the parts where the desk touches the floor.
Met 3006 - P Student Chair:
Metal parts are 16*40 elliptical pipes with electrostatic oven-drying. The back and the seat are PP and very favourable for student orthopaedics.
There are vent holes at the back and the seat and special plastic shoes are used to cover the parts where the desk touches the floor |
